Toyota Celica Tie Rod End Costs
The average cost for a Toyota Celica Tie Rod End Replacement is between $66 - $123. Get an instant quote with our AI repair estimator.
Image Placeholder
What is a tie rod end?
The tie rod end is a crucial component of a vehicle's steering system that connects the steering rack to the steering knuckle on the wheels. Essentially, it's a small joint that allows the wheels to turn and pivot in response to steering input from the driver. Tie rod ends ensure that the wheels are aligned correctly, maintaining stable and predictable vehicle handling. These components are typically found in both inner and outer variations and are key to translating the movements from the steering wheel into lateral motion at the wheels, making them vital for road safety and vehicle control.
Symptoms of a worn tie rod end
When a tie rod end becomes worn or faulty, several symptoms may start to appear, alerting you to a potential problem. Common signs include:
- Wheel Misalignment: A sudden change in wheel alignment, causing your vehicle to pull to one side.
- Uneven Tire Wear: Rapid or uneven tire wear is often indicative of alignment issues caused by a bad tie rod end.
- Steering Wheel Vibration: A noticeable vibration or shimmy in the steering wheel, especially when turning or under load.
- Loose Steering: A feeling of looseness or play in the steering wheel might suggest a failing tie rod end.
- Clunking Noises: While driving, especially over bumps or during turns, you may hear a clunking or rattling noise suggesting the presence of a loose or worn tie rod end.
How urgent is tie rod end replacement?
Replacing a faulty tie rod end is considered a high-priority repair. Should it fail completely, the consequences can be dire, potentially leading to loss of steering control and, subsequently, a higher risk of accidents. Driving with a compromised tie rod end could also lead to uneven tire wear and further damage to the steering system, escalating repair costs. Therefore, it's highly recommended to address tie rod end issues promptly to ensure safety and avoid more costly repairs in the future.
How much does tie rod end replacement cost?
The cost of replacing a tie rod end can vary depending on your vehicle's make and model, but it typically ranges from $100 to $300 per tie rod end. This includes both the parts and labor costs. Labor alone may cost between $50 to $100, depending on the complexity of the vehicle's steering system. It's also advisable to perform a wheel alignment after a tie rod end replacement, which could add an additional $75 to $100 to the total cost. Always consult with a trusted mechanic to get the most accurate estimate for your specific vehicle.
4 FAQs about tie rod ends
- How long do tie rod ends usually last? Tie rod ends generally last between 50,000 to 100,000 miles depending on driving conditions and style. Regular maintenance checks can help catch wear and tear before they escalate into more severe issues.
- Can I replace tie rod ends myself? While it's possible for a knowledgeable DIY mechanic to replace a tie rod end, this task requires specific tools and an understanding of the vehicle's steering system. Additionally, a professional wheel alignment will be necessary after the replacement.
- What happens if a tie rod end breaks? If a tie rod end breaks while driving, it can lead to immediate loss of steering control, which poses a significant safety hazard. This is why it's critical to replace worn tie rod ends promptly.
- Do both tie rod ends need to be replaced at the same time? It's not mandatory to replace both tie rod ends simultaneously, but it is often recommended. This ensures consistent wear and optimal alignment. Additionally, if one tie rod end is worn, the other might not be far behind.
Dev Output
2005 Toyota Celica L4-1.8L (1ZZ-FE) - Tie Rod End Costs
Parts: $55.00Labor: $12.00{ "partPrice": 55, "laborPrice": 12, "alldata_id": 41124, "alldata_vehicle_id": 41124, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.11", "pricecode": "", "partnumber": "4550349035" } ] }, { "name": "Outer Tie Rod", "qualifiers": [ { "name": "Right", "part": [ { "name": "1 - Outer Tie Rod", "price": "77.64", "pricecode": "", "partnumber": "4504649085" } ] }, { "name": "Left", "part": [ { "name": "1 - Outer Tie Rod", "price": "77.64", "pricecode": "", "partnumber": "4504749015" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Inner Tie Rod", "note": "See Steering Gear, Replace And Use Combinations Under Note.", "qualifiers": [] }, { "name": "Outer Tie Rod", "qualifiers": [ { "name": "One Side", "labor": { "skill": "B", "standardtime": "1.3", "warrantytime": "0.9" }, "qualifiers": [] }, { "name": "Both Sides", "labor": { "skill": "B", "standardtime": "1.6", "warrantytime": "1.1" }, "qualifiers": [] } ] } ] } ] }, "year": 2005, "make": "Toyota", "model": "Celica", "engine": "L4-1.8L (1ZZ-FE)" }2005 Toyota Celica L4-1.8L (2ZZ-GE) - Tie Rod End Costs
Parts: $45.00Labor: $36.00{ "partPrice": 45, "laborPrice": 36, "alldata_id": 39500, "alldata_vehicle_id": 39500, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.11", "pricecode": "", "partnumber": "4550349035" } ] }, { "name": "Outer Tie Rod", "qualifiers": [ { "name": "Right", "part": [ { "name": "1 - Outer Tie Rod", "price": "77.64", "pricecode": "", "partnumber": "4504649085" } ] }, { "name": "Left", "part": [ { "name": "1 - Outer Tie Rod", "price": "77.64", "pricecode": "", "partnumber": "4504749015" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Inner Tie Rod", "note": "See Steering Gear, Replace And Use Combinations Under Note.", "qualifiers": [] }, { "name": "Outer Tie Rod", "qualifiers": [ { "name": "One Side", "labor": { "skill": "B", "standardtime": "1.3", "warrantytime": "0.9" }, "qualifiers": [] }, { "name": "Both Sides", "labor": { "skill": "B", "standardtime": "1.6", "warrantytime": "1.1" }, "qualifiers": [] } ] } ] } ] }, "year": 2005, "make": "Toyota", "model": "Celica", "engine": "L4-1.8L (2ZZ-GE)" }2004 Toyota Celica L4-1.8L (1ZZ-FE) - Tie Rod End Costs
Parts: $33.00Labor: $17.00{ "partPrice": 33, "laborPrice": 17, "alldata_id": 41123, "alldata_vehicle_id": 41123, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.11", "pricecode": "", "partnumber": "4550349035" } ] }, { "name": "Outer Tie Rod", "qualifiers": [ { "name": "Right", "part": [ { "name": "1 - Outer Tie Rod", "price": "77.64", "pricecode": "", "partnumber": "4504649085" } ] }, { "name": "Left", "part": [ { "name": "1 - Outer Tie Rod", "price": "77.64", "pricecode": "", "partnumber": "4504749015" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Inner Tie Rod", "note": "See Steering Gear, Replace And Use Combinations Under Note.", "qualifiers": [] }, { "name": "Outer Tie Rod", "qualifiers": [ { "name": "One Side", "labor": { "skill": "B", "standardtime": "1.3", "warrantytime": "0.9" }, "qualifiers": [] }, { "name": "Both Sides", "labor": { "skill": "B", "standardtime": "1.6", "warrantytime": "1.1" }, "qualifiers": [] } ] } ] } ] }, "year": 2004, "make": "Toyota", "model": "Celica", "engine": "L4-1.8L (1ZZ-FE)" }2004 Toyota Celica L4-1.8L (2ZZ-GE) - Tie Rod End Costs
Parts: $45.00Labor: $55.00{ "partPrice": 45, "laborPrice": 55, "alldata_id": 39181, "alldata_vehicle_id": 39181, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.11", "pricecode": "", "partnumber": "4550349035" } ] }, { "name": "Outer Tie Rod", "qualifiers": [ { "name": "Right", "part": [ { "name": "1 - Outer Tie Rod", "price": "77.64", "pricecode": "", "partnumber": "4504649085" } ] }, { "name": "Left", "part": [ { "name": "1 - Outer Tie Rod", "price": "77.64", "pricecode": "", "partnumber": "4504749015" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Inner Tie Rod", "note": "See Steering Gear, Replace And Use Combinations Under Note.", "qualifiers": [] }, { "name": "Outer Tie Rod", "qualifiers": [ { "name": "One Side", "labor": { "skill": "B", "standardtime": "1.3", "warrantytime": "0.9" }, "qualifiers": [] }, { "name": "Both Sides", "labor": { "skill": "B", "standardtime": "1.6", "warrantytime": "1.1" }, "qualifiers": [] } ] } ] } ] }, "year": 2004, "make": "Toyota", "model": "Celica", "engine": "L4-1.8L (2ZZ-GE)" }1996 Toyota Celica L4-107.5 1762cc 1.8L DOHC (7A-FE) - Tie Rod End Costs
Parts: $34.00Labor: $95.00{ "partPrice": 34, "laborPrice": 95, "alldata_id": 23571, "alldata_vehicle_id": 23571, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "221.55", "pricecode": "", "partnumber": "4550329515" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Outer Tie Rod", "price": "70.24", "pricecode": "", "partnumber": "4504629305" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1996, "make": "Toyota", "model": "Celica", "engine": "L4-107.5 1762cc 1.8L DOHC (7A-FE)" }1996 Toyota Celica L4-132 2164cc 2.2L DOHC (5S-FE) - Tie Rod End Costs
Parts: $21.00Labor: $42.00{ "partPrice": 21, "laborPrice": 42, "alldata_id": 23572, "alldata_vehicle_id": 23572, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "221.55", "pricecode": "", "partnumber": "4550329515" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Outer Tie Rod", "price": "70.24", "pricecode": "", "partnumber": "4504629305" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1996, "make": "Toyota", "model": "Celica", "engine": "L4-132 2164cc 2.2L DOHC (5S-FE)" }1994 Toyota Celica L4-107.5 1762cc 1.8L DOHC (7A-FE) - Tie Rod End Costs
Parts: $39.00Labor: $68.00{ "partPrice": 39, "laborPrice": 68, "alldata_id": 20106, "alldata_vehicle_id": 20106, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Outer Tie Rod", "part": [ { "name": "1 - Outer Tie Rod", "price": "70.24", "pricecode": "", "partnumber": "4504629305" } ] }, { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "221.55", "pricecode": "", "partnumber": "4550329515" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1994, "make": "Toyota", "model": "Celica", "engine": "L4-107.5 1762cc 1.8L DOHC (7A-FE)" }1994 Toyota Celica L4-132 2164cc 2.2L DOHC (5S-FE) - Tie Rod End Costs
Parts: $84.00Labor: $56.00{ "partPrice": 84, "laborPrice": 56, "alldata_id": 19058, "alldata_vehicle_id": 19058, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Outer Tie Rod", "part": [ { "name": "1 - Outer Tie Rod", "price": "70.24", "pricecode": "", "partnumber": "4504629305" } ] }, { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "221.55", "pricecode": "", "partnumber": "4550329515" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1994, "make": "Toyota", "model": "Celica", "engine": "L4-132 2164cc 2.2L DOHC (5S-FE)" }1993 Toyota Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) - Tie Rod End Costs
Parts: $24.00Labor: $19.00{ "partPrice": 24, "laborPrice": 19, "alldata_id": 12322, "alldata_vehicle_id": 12322, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1993, "make": "Toyota", "model": "Celica", "engine": "L4-122 1998cc 2.0L DOHC Turbo (3S-GTE)" }1993 Toyota Celica L4-132 2164cc 2.2L DOHC (5S-FE) - Tie Rod End Costs
Parts: $72.00Labor: $59.00{ "partPrice": 72, "laborPrice": 59, "alldata_id": 12323, "alldata_vehicle_id": 12323, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1993, "make": "Toyota", "model": "Celica", "engine": "L4-132 2164cc 2.2L DOHC (5S-FE)" }1993 Toyota Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) - Tie Rod End Costs
Parts: $40.00Labor: $97.00{ "partPrice": 40, "laborPrice": 97, "alldata_id": 19031, "alldata_vehicle_id": 19031, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1993, "make": "Toyota", "model": "Celica", "engine": "L4-96.8 1587cc 1.6L DOHC (4A-FE)" }1991 Toyota Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) - Tie Rod End Costs
Parts: $58.00Labor: $32.00{ "partPrice": 58, "laborPrice": 32, "alldata_id": 12297, "alldata_vehicle_id": 12297, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1991, "make": "Toyota", "model": "Celica", "engine": "L4-122 1998cc 2.0L DOHC Turbo (3S-GTE)" }1991 Toyota Celica L4-132 2164cc 2.2L DOHC (5S-FE) - Tie Rod End Costs
Parts: $26.00Labor: $49.00{ "partPrice": 26, "laborPrice": 49, "alldata_id": 12296, "alldata_vehicle_id": 12296, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1991, "make": "Toyota", "model": "Celica", "engine": "L4-132 2164cc 2.2L DOHC (5S-FE)" }1991 Toyota Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) - Tie Rod End Costs
Parts: $7.00Labor: $54.00{ "partPrice": 7, "laborPrice": 54, "alldata_id": 12298, "alldata_vehicle_id": 12298, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1991, "make": "Toyota", "model": "Celica", "engine": "L4-96.8 1587cc 1.6L DOHC (4A-FE)" }1990 Toyota Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) - Tie Rod End Costs
Parts: $86.00Labor: $43.00{ "partPrice": 86, "laborPrice": 43, "alldata_id": 12294, "alldata_vehicle_id": 12294, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1990, "make": "Toyota", "model": "Celica", "engine": "L4-122 1998cc 2.0L DOHC Turbo (3S-GTE)" }1990 Toyota Celica L4-132 2164cc 2.2L DOHC (5S-FE) - Tie Rod End Costs
Parts: $95.00Labor: $81.00{ "partPrice": 95, "laborPrice": 81, "alldata_id": 12295, "alldata_vehicle_id": 12295, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1990, "make": "Toyota", "model": "Celica", "engine": "L4-132 2164cc 2.2L DOHC (5S-FE)" }1990 Toyota Celica L4-96.8 1587cc 1.6L DOHC (4A-FE) - Tie Rod End Costs
Parts: $50.00Labor: $7.00{ "partPrice": 50, "laborPrice": 7, "alldata_id": 12293, "alldata_vehicle_id": 12293, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "218.77", "pricecode": "", "partnumber": "4550329245" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1990, "make": "Toyota", "model": "Celica", "engine": "L4-96.8 1587cc 1.6L DOHC (4A-FE)" }1989 Toyota Celica L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) - Tie Rod End Costs
Parts: $53.00Labor: $56.00{ "partPrice": 53, "laborPrice": 56, "alldata_id": 12274, "alldata_vehicle_id": 12274, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.86", "pricecode": "", "partnumber": "4550339025" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1989, "make": "Toyota", "model": "Celica", "engine": "L4-122 1998cc 2.0L DOHC Turbo (3S-GTE)" }1989 Toyota Celica L4-1998cc 2.0L DOHC (3S-GE) - Tie Rod End Costs
Parts: $35.00Labor: $67.00{ "partPrice": 35, "laborPrice": 67, "alldata_id": 12273, "alldata_vehicle_id": 12273, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.86", "pricecode": "", "partnumber": "4550339025" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1989, "make": "Toyota", "model": "Celica", "engine": "L4-1998cc 2.0L DOHC (3S-GE)" }1989 Toyota Celica L4-2.0L (3S-FE) - Tie Rod End Costs
Parts: $94.00Labor: $57.00{ "partPrice": 94, "laborPrice": 57, "alldata_id": 12272, "alldata_vehicle_id": 12272, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.86", "pricecode": "", "partnumber": "4550339025" } ] }, { "name": "Outer Tie Rod", "part": [ { "name": "1 - Tie Rod End", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1989, "make": "Toyota", "model": "Celica", "engine": "L4-2.0L (3S-FE)" }1987 Toyota Celica L4-1998cc 2.0L DOHC (3S-GE) - Tie Rod End Costs
Parts: $2.00Labor: $1.00{ "partPrice": 2, "laborPrice": 1, "alldata_id": 11973, "alldata_vehicle_id": 11973, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Outer", "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Outer Tie Rod", "part": [ { "name": "1 - Outer Tie Rod", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, { "name": "Inner", "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.86", "pricecode": "", "partnumber": "4550339025" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1987, "make": "Toyota", "model": "Celica", "engine": "L4-1998cc 2.0L DOHC (3S-GE)" }1987 Toyota Celica L4-2.0L (3S-FE) - Tie Rod End Costs
Parts: $27.00Labor: $72.00{ "partPrice": 27, "laborPrice": 72, "alldata_id": 11972, "alldata_vehicle_id": 11972, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Outer", "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Outer Tie Rod", "part": [ { "name": "1 - Outer Tie Rod", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, { "name": "Inner", "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.86", "pricecode": "", "partnumber": "4550339025" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1987, "make": "Toyota", "model": "Celica", "engine": "L4-2.0L (3S-FE)" }1986 Toyota Celica L4-1995cc 2.0L SOHC (2S-E) - Tie Rod End Costs
Parts: $20.00Labor: $15.00{ "partPrice": 20, "laborPrice": 15, "alldata_id": 3836, "alldata_vehicle_id": 3836, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Outer", "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Outer Tie Rod", "part": [ { "name": "1 - Outer Tie Rod", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, { "name": "Inner", "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.86", "pricecode": "", "partnumber": "4550339025" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1986, "make": "Toyota", "model": "Celica", "engine": "L4-1995cc 2.0L SOHC (2S-E)" }1986 Toyota Celica L4-1998cc 2.0L DOHC (3S-GE) - Tie Rod End Costs
Parts: $29.00Labor: $13.00{ "partPrice": 29, "laborPrice": 13, "alldata_id": 11992, "alldata_vehicle_id": 11992, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Outer", "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Outer Tie Rod", "part": [ { "name": "1 - Outer Tie Rod", "price": "70.01", "pricecode": "", "partnumber": "4504619175" } ] } ] } ] }, { "name": "Inner", "qualifiers": [ { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "219.86", "pricecode": "", "partnumber": "4550339025" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1986, "make": "Toyota", "model": "Celica", "engine": "L4-1998cc 2.0L DOHC (3S-GE)" }1985 Toyota Celica L4-2366cc 22R - Tie Rod End Costs
Parts: $79.00Labor: $85.00{ "partPrice": 79, "laborPrice": 85, "alldata_id": 3825, "alldata_vehicle_id": 3825, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Outer", "qualifiers": [ { "name": "Power, Rack & Pinion", "part": [ { "name": "1 - Tie Rod End", "price": "0.00", "pricecode": "", "partnumber": "NO LISTING" } ] } ] }, { "name": "Inner", "qualifiers": [ { "name": "Power, Rack & Pinion", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "143.52", "pricecode": "", "partnumber": "4550329125" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Rack & Pinion Type", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. Includes R&I Outer Ends.", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Outer", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Both", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Rack & Piston Type, Worm & Ball Nut Type", "qualifiers": [ { "name": "Four", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "2.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "One", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Three", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.7", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Two", "labor": { "note": "Includes: Toe-in adjust. Does not Include: R&I Rack and Pinion Gear. ", "skill": "B", "standardtime": "1.4", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, "year": 1985, "make": "Toyota", "model": "Celica", "engine": "L4-2366cc 22R" }1984 Toyota Celica L4-2366cc 22R - Tie Rod End Costs
Parts: $18.00Labor: $50.00{ "partPrice": 18, "laborPrice": 50, "alldata_id": 3815, "alldata_vehicle_id": 3815, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Outer", "qualifiers": [ { "name": "Power, Conventional", "part": [ { "name": "1 - Tie Rod End", "price": "64.06", "pricecode": "", "partnumber": "4504629076" } ] }, { "name": "Power, Rack & Pinion", "part": [ { "name": "1 - Tie Rod End", "price": "0.00", "pricecode": "", "partnumber": "NO LISTING" } ] } ] }, { "name": "Inner", "qualifiers": [ { "name": "Power, Conventional", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "2 - Inner Tie Rod", "price": "58.55", "pricecode": "", "partnumber": "4540629105" } ] } ] }, { "name": "Power, Rack & Pinion", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "143.52", "pricecode": "", "partnumber": "4550329125" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "Power, Conventional", "qualifiers": [ { "name": "One Side", "labor": { "note": "Does Not Include: Adjust Toe-In. ", "skill": "B", "standardtime": "1.3", "warrantytime": "0.9" }, "qualifiers": [] } ] }, { "name": "Power, Rack & Pinion", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: R&R Steering Gear. ", "skill": "B", "standardtime": "2.8", "warrantytime": "2.0" }, "qualifiers": [] } ] } ] }, { "name": "Inner & Outer", "qualifiers": [ { "name": "Power, Conventional", "qualifiers": [ { "name": "One Side", "labor": { "note": "Does Not Include: Adjust Toe-In. ", "skill": "B", "standardtime": "1.3", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Outer", "qualifiers": [ { "name": "Power, Conventional", "qualifiers": [ { "name": "One Side", "labor": { "note": "Does Not Include: Adjust Toe-In. ", "skill": "B", "standardtime": "1.3", "warrantytime": "0.9" }, "qualifiers": [] } ] }, { "name": "Power, Rack & Pinion", "qualifiers": [ { "name": "One Side", "labor": { "note": "Does Not Include: Adjust Toe-In. ", "skill": "B", "standardtime": "1.3", "warrantytime": "0.9" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1984, "make": "Toyota", "model": "Celica", "engine": "L4-2366cc 22R" }1983 Toyota Celica L4-2366cc 22R - Tie Rod End Costs
Parts: $90.00Labor: $1.00{ "partPrice": 90, "laborPrice": 1, "alldata_id": 3808, "alldata_vehicle_id": 3808, "title": "Tie Rod End", "parts": { "qualifiers": [ { "name": "Outer", "qualifiers": [ { "name": "Manual", "part": [ { "name": "1 - Tie Rod End", "price": "123.39", "pricecode": "", "partnumber": "4546029225" } ] }, { "name": "Power", "part": [ { "name": "1 - Tie Rod End", "price": "123.39", "pricecode": "", "partnumber": "4546029225" } ] } ] }, { "name": "Inner", "qualifiers": [ { "name": "Manual", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "143.52", "pricecode": "", "partnumber": "4550329125" } ] } ] }, { "name": "Power", "qualifiers": [ { "name": "Inner Tie Rod", "part": [ { "name": "3 - Inner Tie Rod", "price": "143.52", "pricecode": "", "partnumber": "4550329125" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Inner", "qualifiers": [ { "name": "Manual", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: Adjust Toe-In. ", "skill": "B", "standardtime": "2.3", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "Power", "qualifiers": [ { "name": "One Side", "labor": { "note": "Includes: R&R Steering Gear.-In ", "skill": "B", "standardtime": "2.3", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Outer", "qualifiers": [ { "name": "Manual", "labor": { "note": "Includes: Adjust Toe-In. ", "skill": "B", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Power", "qualifiers": [ { "name": "One Side", "labor": { "note": "Does Not Include: Adjust Toe-In. ", "skill": "B", "standardtime": "1.3", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1983, "make": "Toyota", "model": "Celica", "engine": "L4-2366cc 22R" }