Honda Accord Piston Ring, Engine Costs
The average cost for a Honda Accord Piston Ring, Engine Replacement is between $75 - $139. Get an instant quote with our AI repair estimator.
Image Placeholder
What is an engine piston ring?
An engine piston ring is a metallic split ring that is attached to the outer diameter of a piston in an internal combustion engine. The primary roles of piston rings are to seal the combustion chamber from the crankcase, control the consumption of the engine oil by scraping off excess oil on the cylinder walls, and transfer heat from the piston to the cylinder wall. Constructed from durable materials such as cast iron or steel, piston rings are designed with precision to cope with the high pressures and temperatures inside the engine. Efficient piston rings are crucial for maintaining engine compression and optimizing performance.
Symptoms of worn piston rings
Worn or damaged piston rings can lead to a variety of symptoms that indicate engine problems. One of the most common signs is excessive oil consumption, as faulty rings fail to scrape the excess oil off the cylinder walls, leading to oil burning and a visible blue smoke from the exhaust. Another symptom is a loss of engine power, often noticeable as a decrease in acceleration and poor overall performance, due to a loss of compression within the cylinders. You might also experience increased exhaust emissions, a rough idle, or difficulty starting the engine. Moreover, a noticeable decrease in fuel efficiency can occur, as the engine works harder to maintain power levels. If left unchecked, worn piston rings can result in severe engine damage, necessitating a comprehensive and costly repair.
How urgent is piston ring replacement?
Replacing worn or damaged piston rings is quite urgent. Driving with faulty piston rings can lead to several issues, including excessive oil burning, increased emissions, reduced engine performance, and in severe cases, significant engine damage such as cylinder wall scoring. This can escalate repair costs and result in a complete engine failure if not addressed promptly. Therefore, once symptoms of piston ring wear are observed, it's crucial to consult a mechanic immediately to prevent further damage and costly repairs.
How much does piston ring replacement cost?
The cost of replacing piston rings can vary widely depending on the make and model of the vehicle, the condition of other engine components, and labor costs in your area. On average, the replacement can range from $1,500 to $4,000 due to the labor-intensive nature of the job, which involves disassembling the engine to reach and replace the rings. Additional costs may also arise if other components like pistons or cylinder walls need repair or replacement. As such, it's essential to consider both part and labor costs when estimating the total expenses.
5 FAQs about engine piston rings
- What causes piston rings to wear out? Piston rings wear out due to several reasons, including poor engine maintenance, low-quality or insufficient lubrication, and engine overheating. Over time, the constant high-pressure contact with the cylinder walls can cause them to lose their shape and effectiveness.
- How long do piston rings typically last? Piston rings are designed to endure and can often last between 100,000 to 150,000 miles under optimal maintenance conditions. However, their lifespan can be significantly reduced by harsh driving conditions or neglecting regular engine service.
- Can I drive with worn piston rings? While it might be possible to drive with worn piston rings for a short period, it is not advisable. Continuing to drive can lead to severe engine damage, increased oil consumption, and unnecessary strain on other engine components, leading to more expensive repairs down the road.
- What can I do to extend the life of piston rings? Maintaining frequent oil changes with high-quality oil and using the correct fuel can help extend the life of piston rings. Regular engine check-ups and avoiding excessive engine overheating will also contribute to their longevity.
- How can I know for sure if my piston rings are bad? A compression test is often used by mechanics to determine the state of the piston rings. A significant drop in compression typically indicates worn or damaged rings. For precise diagnosis and repair options, a qualified mechanic should inspect the vehicle.
Dev Output
2012 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $51.00Labor: $88.00{ "partPrice": 51, "laborPrice": 88, "alldata_id": 50970, "alldata_vehicle_id": 50970, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "qualifiers": [ { "name": "Standard", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "98.58", "pricecode": "", "partnumber": "13011R40A12" } ] }, { "name": "O.S. 0.25", "qualifiers": [ { "name": "Sedan", "qualifiers": [ { "name": "Riken", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "", "partnumber": "13021R40A12" } ] } ] }, { "name": "Coupe", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "", "partnumber": "13021R40A12" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "12.9", "warrantytime": "9.7" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2012, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2012 Honda Accord V6-3.5L - Piston Ring, Engine Costs
Parts: $51.00Labor: $76.00{ "partPrice": 51, "laborPrice": 76, "alldata_id": 50971, "alldata_vehicle_id": 50971, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "qualifiers": [ { "name": "Standard", "part": [ { "name": "28 - Piston Rings", "note": "Includes: Ring Set For One Piston.", "price": "38.35", "pricecode": "", "partnumber": "13011RV0A01" } ] }, { "name": "O.S. 0.25", "part": [ { "name": "28 - Piston Rings", "note": "Includes: Ring Set For One Piston.", "price": "74.35", "pricecode": "", "partnumber": "13021RV0A01" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "20.6", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2012, "make": "Honda", "model": "Accord", "engine": "V6-3.5L" }2011 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $76.00Labor: $67.00{ "partPrice": 76, "laborPrice": 67, "alldata_id": 48679, "alldata_vehicle_id": 48679, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "qualifiers": [ { "name": "Standard", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "98.58", "pricecode": "", "partnumber": "13011R40A11" } ] }, { "name": "O.S. 0.25", "qualifiers": [ { "name": "Sedan", "qualifiers": [ { "name": "Riken", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "75.47", "pricecode": "", "partnumber": "13021R40A11" } ] } ] }, { "name": "Coupe", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "75.47", "pricecode": "", "partnumber": "13021R40A11" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "12.9", "warrantytime": "9.7" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2011, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2011 Honda Accord V6-3.5L - Piston Ring, Engine Costs
Parts: $10.00Labor: $9.00{ "partPrice": 10, "laborPrice": 9, "alldata_id": 48680, "alldata_vehicle_id": 48680, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "qualifiers": [ { "name": "Standard", "part": [ { "name": "28 - Piston Rings", "note": "Includes: Ring Set For One Piston.", "price": "38.35", "pricecode": "", "partnumber": "13011RV0A01" } ] }, { "name": "O.S. 0.25", "part": [ { "name": "28 - Piston Rings", "note": "Includes: Ring Set For One Piston.", "price": "74.35", "pricecode": "", "partnumber": "13021RV0A01" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "20.6", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2011, "make": "Honda", "model": "Accord", "engine": "V6-3.5L" }2010 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $86.00Labor: $46.00{ "partPrice": 86, "laborPrice": 46, "alldata_id": 47502, "alldata_vehicle_id": 47502, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Ring Set, Piston (Std) (Allied Ring)", "part": [ { "name": "2 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "79.57", "pricecode": "", "partnumber": "13011R44A01" } ] }, { "name": "Ring Set, Piston (Std) (Riken)", "part": [ { "name": "2 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "43.92", "pricecode": "", "partnumber": "13011R40A01" } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "12.9", "warrantytime": "9.7" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2010, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2010 Honda Accord V6-3.5L - Piston Ring, Engine Costs
Parts: $80.00Labor: $60.00{ "partPrice": 80, "laborPrice": 60, "alldata_id": 47503, "alldata_vehicle_id": 47503, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Ring Set, Piston (Std) (Allied Ring)", "part": [ { "name": "2 - Piston Ring Set", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011R70A02" } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "20.6", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2010, "make": "Honda", "model": "Accord", "engine": "V6-3.5L" }2009 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $48.00Labor: $10.00{ "partPrice": 48, "laborPrice": 10, "alldata_id": 45761, "alldata_vehicle_id": 45761, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "qualifiers": [ { "name": "Standard", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "79.57", "pricecode": "", "partnumber": "13011R44A01" } ] }, { "name": "O.S. 0.25", "qualifiers": [ { "name": "Honda Code 8772568", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "163.10", "pricecode": "", "partnumber": "13021R40A01" } ] }, { "name": "Honda Code 8810350", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "", "partnumber": "13021R44A01" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "12.9", "warrantytime": "9.7" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2009, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2009 Honda Accord V6-3.5L - Piston Ring, Engine Costs
Parts: $35.00Labor: $21.00{ "partPrice": 35, "laborPrice": 21, "alldata_id": 45762, "alldata_vehicle_id": 45762, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "qualifiers": [ { "name": "Standard", "part": [ { "name": "28 - Piston Rings", "note": "Includes: Ring Set For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011R70A02" } ] }, { "name": "O.S. 0.25", "part": [ { "name": "28 - Piston Rings", "note": "Includes: Ring Set For One Piston.", "price": "0.00", "pricecode": "", "partnumber": "13021R70A01" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "20.6", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2009, "make": "Honda", "model": "Accord", "engine": "V6-3.5L" }2008 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $45.00Labor: $65.00{ "partPrice": 45, "laborPrice": 65, "alldata_id": 44587, "alldata_vehicle_id": 44587, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "qualifiers": [ { "name": "Standard", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "79.57", "pricecode": "", "partnumber": "13011R44A01" } ] }, { "name": "O.S. 0.25", "qualifiers": [ { "name": "Honda Code 8772568", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "163.10", "pricecode": "", "partnumber": "13021R40A01" } ] }, { "name": "Honda Code 8810350", "part": [ { "name": "36 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "", "partnumber": "13021R44A01" } ] } ] } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "12.9", "warrantytime": "9.7" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.5" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2008, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2008 Honda Accord V6-3.5L - Piston Ring, Engine Costs
Parts: $88.00Labor: $50.00{ "partPrice": 88, "laborPrice": 50, "alldata_id": 45250, "alldata_vehicle_id": 45250, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "qualifiers": [ { "name": "Standard", "part": [ { "name": "28 - Piston Rings", "note": "Includes: Ring Set For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011R70A02" } ] }, { "name": "O.S. 0.25", "part": [ { "name": "28 - Piston Rings", "note": "Includes: Ring Set For One Piston.", "price": "0.00", "pricecode": "", "partnumber": "13021R70A01" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Remove & Replace", "qualifiers": [ { "name": "Pistons, Rings & Bearings", "qualifiers": [ { "name": "Piston Rings, R&R", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "20.6", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] }, { "name": "Each Additional", "labor": { "note": "Includes: Remove Cylinder Top Ridge, Deglaze Cylinder Walls And Clean Carbon.", "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "qualifiers": [ { "name": "Each", "labor": { "standardtime": "0.1" }, "qualifiers": [] } ] }, { "name": "To R&R Piston, Pin Or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "standardtime": "0.2" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "standardtime": "0.1" }, "qualifiers": [] }, { "name": "All", "labor": { "standardtime": "0.7" }, "qualifiers": [] } ] } ] } ] } ] } ] } ] } ] }, "year": 2008, "make": "Honda", "model": "Accord", "engine": "V6-3.5L" }2007 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $81.00Labor: $99.00{ "partPrice": 81, "laborPrice": 99, "alldata_id": 42972, "alldata_vehicle_id": 42972, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "part": [ { "name": "38 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "71.33", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011RAAA01" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, R&R", "labor": { "note": "Includes: R&I Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "12.7", "warrantytime": "9.3" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To Grind Valves, Add", "labor": { "skill": "A", "standardtime": "3.8", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.6", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To R&R Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "1.9", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To R&R Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.6", "warrantytime": "1.3" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Chain, Add", "labor": { "skill": "A", "standardtime": "1.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.4", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 2007, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2007 Honda Accord V6-3.0L Hybrid - Piston Ring, Engine Costs
Parts: $66.00Labor: $69.00{ "partPrice": 66, "laborPrice": 69, "alldata_id": 42974, "alldata_vehicle_id": 42974, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "part": [ { "name": "23 - Piston Rings", "note": "Includes: Standard Rings For One Piston.", "price": "91.83", "pricecode": "", "partnumber": "13011RDVJ01" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Both Banks", "qualifiers": [ { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "16.8", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, { "name": "Front Bank", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "14.2", "warrantytime": "10.7" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Each Additional Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.5", "warrantytime": "0.4" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "15.2", "warrantytime": "11.5" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, { "name": "Rear Bank", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "14.2", "warrantytime": "11.5" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Each Additional Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.5", "warrantytime": "0.4" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "15.2", "warrantytime": "12.3" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] } ] } ] }, "year": 2007, "make": "Honda", "model": "Accord", "engine": "V6-3.0L Hybrid" }2006 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $3.00Labor: $27.00{ "partPrice": 3, "laborPrice": 27, "alldata_id": 43630, "alldata_vehicle_id": 43630, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "part": [ { "name": "38 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "71.33", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011RAAA01" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, R&R", "labor": { "note": "Includes: R&I Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "12.7", "warrantytime": "9.3" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To Grind Valves, Add", "labor": { "skill": "A", "standardtime": "3.8", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.6", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To R&R Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "1.9", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To R&R Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.6", "warrantytime": "1.3" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Chain, Add", "labor": { "skill": "A", "standardtime": "1.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.4", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 2006, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2006 Honda Accord V6-3.0L Hybrid - Piston Ring, Engine Costs
Parts: $88.00Labor: $76.00{ "partPrice": 88, "laborPrice": 76, "alldata_id": 42152, "alldata_vehicle_id": 42152, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "part": [ { "name": "23 - Piston Rings", "note": "Includes: Standard Rings For One Piston.", "price": "91.83", "pricecode": "", "partnumber": "13011RDVJ01" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Both Banks", "qualifiers": [ { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "16.8", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, { "name": "Front Bank", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "14.2", "warrantytime": "10.7" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Each Additional Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.5", "warrantytime": "0.4" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "15.2", "warrantytime": "11.5" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, { "name": "Rear Bank", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "14.2", "warrantytime": "11.5" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Each Additional Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.5", "warrantytime": "0.4" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "15.2", "warrantytime": "12.3" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] } ] } ] }, "year": 2006, "make": "Honda", "model": "Accord", "engine": "V6-3.0L Hybrid" }2005 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $17.00Labor: $16.00{ "partPrice": 17, "laborPrice": 16, "alldata_id": 40354, "alldata_vehicle_id": 40354, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "part": [ { "name": "38 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "71.33", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011RAAA01" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, R&R", "labor": { "note": "Includes: R&I Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "12.7", "warrantytime": "9.3" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To Grind Valves, Add", "labor": { "skill": "A", "standardtime": "3.8", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.6", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To R&R Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "1.9", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To R&R Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.6", "warrantytime": "1.3" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Chain, Add", "labor": { "skill": "A", "standardtime": "1.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.4", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 2005, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2005 Honda Accord V6-3.0L Hybrid - Piston Ring, Engine Costs
Parts: $78.00Labor: $93.00{ "partPrice": 78, "laborPrice": 93, "alldata_id": 40356, "alldata_vehicle_id": 40356, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "part": [ { "name": "23 - Piston Rings", "note": "Includes: Standard Rings For One Piston.", "price": "91.83", "pricecode": "", "partnumber": "13011RDVJ01" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Both Banks", "qualifiers": [ { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "16.8", "warrantytime": "0.0" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, { "name": "Front Bank", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "14.2", "warrantytime": "10.7" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Each Additional Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.5", "warrantytime": "0.4" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "15.2", "warrantytime": "11.5" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] }, { "name": "Rear Bank", "qualifiers": [ { "name": "One Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "14.2", "warrantytime": "11.5" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "Each Additional Cylinder", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.5", "warrantytime": "0.4" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&I Connecting Rod, Piston Rings, Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "15.2", "warrantytime": "12.3" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.7", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Belt, Add", "labor": { "skill": "A", "standardtime": "1.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] } ] } ] }, "year": 2005, "make": "Honda", "model": "Accord", "engine": "V6-3.0L Hybrid" }2004 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $80.00Labor: $70.00{ "partPrice": 80, "laborPrice": 70, "alldata_id": 40350, "alldata_vehicle_id": 40350, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "part": [ { "name": "38 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "71.33", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011RAAA01" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, R&R", "labor": { "note": "Includes: R&I Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "12.7", "warrantytime": "9.3" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To Grind Valves, Add", "labor": { "skill": "A", "standardtime": "3.8", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.6", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To R&R Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "1.9", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To R&R Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.6", "warrantytime": "1.3" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Chain, Add", "labor": { "skill": "A", "standardtime": "1.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.4", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 2004, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }2003 Honda Accord L4-2.4L - Piston Ring, Engine Costs
Parts: $98.00Labor: $12.00{ "partPrice": 98, "laborPrice": 12, "alldata_id": 40349, "alldata_vehicle_id": 40349, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings", "part": [ { "name": "38 - Piston Rings", "note": "Includes: Rings For One Piston.", "price": "71.33", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011RAAA01" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, R&R", "labor": { "note": "Includes: R&I Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "12.7", "warrantytime": "9.3" }, "qualifiers": [ { "name": "NOTE", "qualifiers": [ { "name": "To Grind Valves, Add", "labor": { "skill": "A", "standardtime": "3.8", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To R&R Connecting Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.6", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To R&R Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "1.9", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To R&R Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.6", "warrantytime": "1.3" }, "qualifiers": [] }, { "name": "To R&R Piston, Pin or Connecting Rod, Add", "qualifiers": [ { "name": "One", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Each Additional", "labor": { "skill": "A", "standardtime": "0.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "All", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "To R&R Spark Plugs, Add", "labor": { "skill": "A", "standardtime": "0.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "To R&R Timing Chain, Add", "labor": { "skill": "A", "standardtime": "1.1", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.4", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 2003, "make": "Honda", "model": "Accord", "engine": "L4-2.4L" }1994 Honda Accord L4-2.2L SOHC VTEC - Piston Ring, Engine Costs
Parts: $100.00Labor: $80.00{ "partPrice": 100, "laborPrice": 80, "alldata_id": 21901, "alldata_vehicle_id": 21901, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Japan Built", "qualifiers": [ { "name": "Riken", "part": [ { "name": "29 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] }, { "name": "Teikoku", "part": [ { "name": "29 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] } ] }, { "name": "U.S.A. Built", "part": [ { "name": "29 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Add Following Operations If Performed With Piston & Ring Jobs", "qualifiers": [ { "name": "Crankshaft, Renew", "labor": { "skill": "A", "standardtime": "4.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Oil Pump, Renew", "labor": { "skill": "A", "standardtime": "2.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Timing Belt, Balancer Belt and/Ordrive Pulley, Renew", "labor": { "skill": "A", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Tune-Up", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Camshaft and/or", "qualifiers": [ { "name": "Rocker Arms, Renew", "labor": { "skill": "A", "standardtime": "1.1", "warrantytime": "0.8" }, "qualifiers": [] } ] }, { "name": "To Replace Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Piston and/or Pin, Add", "qualifiers": [ { "name": "One or All", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1994, "make": "Honda", "model": "Accord", "engine": "L4-2.2L SOHC VTEC" }1994 Honda Accord L4-2156cc 2.2L SOHC MFI - Piston Ring, Engine Costs
Parts: $70.00Labor: $18.00{ "partPrice": 70, "laborPrice": 18, "alldata_id": 27817, "alldata_vehicle_id": 27817, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Japan Built", "qualifiers": [ { "name": "Riken", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] }, { "name": "Teikoku", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] } ] }, { "name": "U.S.A. Built", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Add Following Operations If Performed With Piston & Ring Jobs", "qualifiers": [ { "name": "Crankshaft, Renew", "labor": { "skill": "A", "standardtime": "4.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Oil Pump, Renew", "labor": { "skill": "A", "standardtime": "2.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Timing Belt, Balancer Belt and/or Drive Pulley, Renew", "labor": { "skill": "A", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Tune-Up", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Camshaft and/or", "qualifiers": [ { "name": "Rocker Arms, Renew", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Piston and/or Pin, Add", "qualifiers": [ { "name": "One or All", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1994, "make": "Honda", "model": "Accord", "engine": "L4-2156cc 2.2L SOHC MFI" }1993 Honda Accord L4-2156cc 2.2L SOHC - Piston Ring, Engine Costs
Parts: $74.00Labor: $97.00{ "partPrice": 74, "laborPrice": 97, "alldata_id": 5551, "alldata_vehicle_id": 5551, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] }, { "name": "Teikoku", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Add Following Operations If Performed With Piston & Ring Jobs", "qualifiers": [ { "name": "Crankshaft, Renew", "labor": { "skill": "A", "standardtime": "4.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Oil Pump, Renew", "labor": { "skill": "A", "standardtime": "2.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Timing Belt, Balancer Belt and/or Drive Pulley, Renew", "labor": { "skill": "A", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Tune-Up", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "All Rings", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Camshaft and/or", "qualifiers": [ { "name": "Rocker Arms, Renew", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Piston and/or Pin, Add", "qualifiers": [ { "name": "One or All", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1993, "make": "Honda", "model": "Accord", "engine": "L4-2156cc 2.2L SOHC" }1992 Honda Accord L4-2156cc 2.2L SOHC - Piston Ring, Engine Costs
Parts: $64.00Labor: $49.00{ "partPrice": 64, "laborPrice": 49, "alldata_id": 3010, "alldata_vehicle_id": 3010, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] }, { "name": "Teikoku", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Add Following Operations If Performed With Piston & Ring Jobs", "qualifiers": [ { "name": "Crankshaft, Renew", "labor": { "skill": "A", "standardtime": "4.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Oil Pump, Renew", "labor": { "skill": "A", "standardtime": "2.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Timing Belt, Balancer Belt and/or Drive Pulley, Renew", "labor": { "skill": "A", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Tune-Up", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "All Rings", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Camshaft and/or", "qualifiers": [ { "name": "Rocker Arms, Renew", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Piston and/or Pin, Add", "qualifiers": [ { "name": "One or All", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1992, "make": "Honda", "model": "Accord", "engine": "L4-2156cc 2.2L SOHC" }1991 Honda Accord L4-2156cc 2.2L SOHC - Piston Ring, Engine Costs
Parts: $78.00Labor: $42.00{ "partPrice": 78, "laborPrice": 42, "alldata_id": 3003, "alldata_vehicle_id": 3003, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] }, { "name": "Teikoku", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011P0A004" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Add Following Operations If Performed With Piston & Ring Jobs", "qualifiers": [ { "name": "Crankshaft, Renew", "labor": { "skill": "A", "standardtime": "4.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Oil Pump, Renew", "labor": { "skill": "A", "standardtime": "2.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Timing Belt, Balancer Belt and/or Drive Pulley, Renew", "labor": { "skill": "A", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Tune-Up", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "All Rings", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Camshaft and/or", "qualifiers": [ { "name": "Rocker Arms, Renew", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Piston and/or Pin, Add", "qualifiers": [ { "name": "One or All", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1991, "make": "Honda", "model": "Accord", "engine": "L4-2156cc 2.2L SOHC" }1990 Honda Accord L4-2156cc 2.2L SOHC - Piston Ring, Engine Costs
Parts: $40.00Labor: $44.00{ "partPrice": 40, "laborPrice": 44, "alldata_id": 2995, "alldata_vehicle_id": 2995, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "60.55", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PT0B04" } ] }, { "name": "Teikoku", "part": [ { "name": "25 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "60.55", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PT0B04" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Add Following Operations If Performed With Piston & Ring Jobs", "qualifiers": [ { "name": "Crankshaft, Renew", "labor": { "skill": "A", "standardtime": "4.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Oil Pump, Renew", "labor": { "skill": "A", "standardtime": "2.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Timing Belt, Balancer Belt and/or Drive Pulley, Renew", "labor": { "skill": "A", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Tune-Up", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "All Rings", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Camshaft and/or", "qualifiers": [ { "name": "Rocker Arms, Renew", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Piston and/or Pin, Add", "qualifiers": [ { "name": "One or All", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1990, "make": "Honda", "model": "Accord", "engine": "L4-2156cc 2.2L SOHC" }1989 Honda Accord L4-1955cc 2.0L SOHC 2-bbl - Piston Ring, Engine Costs
Parts: $2.00Labor: $19.00{ "partPrice": 2, "laborPrice": 19, "alldata_id": 27853, "alldata_vehicle_id": 27853, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "22 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4004" } ] }, { "name": "Teikoku", "part": [ { "name": "22 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4751" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Add Following Operations If Performed With Piston & Ring Jobs", "qualifiers": [ { "name": "Crankshaft, Renew", "labor": { "skill": "A", "standardtime": "4.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Main Bearings, Renew", "labor": { "skill": "A", "standardtime": "1.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Oil Pump, Renew", "labor": { "skill": "A", "standardtime": "1.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Timing Belt and/or Pulley, Renew", "labor": { "skill": "A", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Tune-Up", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind All Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Camshaft & Rocker Arms, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To Replace Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Exhaust Manifold, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Piston and/or Pin, Add", "qualifiers": [ { "name": "One or All", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1989, "make": "Honda", "model": "Accord", "engine": "L4-1955cc 2.0L SOHC 2-bbl" }1989 Honda Accord L4-1955cc 2.0L SOHC FI - Piston Ring, Engine Costs
Parts: $76.00Labor: $9.00{ "partPrice": 76, "laborPrice": 9, "alldata_id": 27851, "alldata_vehicle_id": 27851, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "22 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4004" } ] }, { "name": "Teikoku", "part": [ { "name": "22 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4751" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Add Following Operations If Performed With Piston & Ring Jobs", "qualifiers": [ { "name": "Crankshaft, Renew", "labor": { "skill": "A", "standardtime": "4.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Main Bearings, Renew", "labor": { "skill": "A", "standardtime": "1.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Oil Pump, Renew", "labor": { "skill": "A", "standardtime": "1.3", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Timing Belt and/or Pulley, Renew", "labor": { "skill": "A", "standardtime": "1.0", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "Tune-Up", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.0" }, "qualifiers": [] } ] }, { "name": "All Cylinders", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind All Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Camshaft & Rocker Arms, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To Replace Cylinder Head, Add", "qualifiers": [ { "name": "Bare Assembly", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "Complete Assembly", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Exhaust Manifold, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Piston and/or Pin, Add", "qualifiers": [ { "name": "One or All", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] } ] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1989, "make": "Honda", "model": "Accord", "engine": "L4-1955cc 2.0L SOHC FI" }1988 Honda Accord L4-1955cc 2.0L SOHC 2-bbl - Piston Ring, Engine Costs
Parts: $55.00Labor: $77.00{ "partPrice": 55, "laborPrice": 77, "alldata_id": 27854, "alldata_vehicle_id": 27854, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "22 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4004" } ] }, { "name": "Teikoku", "part": [ { "name": "22 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4751" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind All Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Bare Cylinder Head, Add", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "To Replace Camshaft & Rocker Arms, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To Replace Exhaust Manifold, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1988, "make": "Honda", "model": "Accord", "engine": "L4-1955cc 2.0L SOHC 2-bbl" }1988 Honda Accord L4-1955cc 2.0L SOHC FI - Piston Ring, Engine Costs
Parts: $80.00Labor: $13.00{ "partPrice": 80, "laborPrice": 13, "alldata_id": 27855, "alldata_vehicle_id": 27855, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "22 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4004" } ] }, { "name": "Teikoku", "part": [ { "name": "22 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4751" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "8.8", "warrantytime": "6.3" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "To Grind All Valves & Seats, Add", "labor": { "skill": "A", "standardtime": "4.5", "warrantytime": "3.2" }, "qualifiers": [] }, { "name": "To Replace Bare Cylinder Head, Add", "labor": { "skill": "A", "standardtime": "2.2", "warrantytime": "1.6" }, "qualifiers": [] }, { "name": "To Replace Camshaft & Rocker Arms, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To Replace Exhaust Manifold, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "To Replace Main Bearings, Add", "labor": { "skill": "A", "standardtime": "1.5", "warrantytime": "1.1" }, "qualifiers": [] }, { "name": "To Replace Rod Bearings, Add", "labor": { "skill": "A", "standardtime": "0.8", "warrantytime": "0.5" }, "qualifiers": [] }, { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.5", "warrantytime": "0.3" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1988, "make": "Honda", "model": "Accord", "engine": "L4-1955cc 2.0L SOHC FI" }1987 Honda Accord L4-1955cc 2.0L SOHC 2-bbl - Piston Ring, Engine Costs
Parts: $96.00Labor: $15.00{ "partPrice": 96, "laborPrice": 15, "alldata_id": 27857, "alldata_vehicle_id": 27857, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4004" } ] }, { "name": "Teikoku", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4751" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "6.9", "warrantytime": "4.9" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "With 4WD, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "2.1", "warrantytime": "1.5" }, "qualifiers": [] }, { "name": "With PS, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.4", "warrantytime": "0.2" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1987, "make": "Honda", "model": "Accord", "engine": "L4-1955cc 2.0L SOHC 2-bbl" }1987 Honda Accord L4-1955cc 2.0L SOHC FI - Piston Ring, Engine Costs
Parts: $7.00Labor: $71.00{ "partPrice": 7, "laborPrice": 71, "alldata_id": 27856, "alldata_vehicle_id": 27856, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4004" } ] }, { "name": "Teikoku", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4751" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "6.9", "warrantytime": "4.9" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "With 4WD, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "2.1", "warrantytime": "1.5" }, "qualifiers": [] }, { "name": "With PS, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.4", "warrantytime": "0.2" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1987, "make": "Honda", "model": "Accord", "engine": "L4-1955cc 2.0L SOHC FI" }1986 Honda Accord L4-1955cc 2.0L SOHC 2-bbl - Piston Ring, Engine Costs
Parts: $28.00Labor: $60.00{ "partPrice": 28, "laborPrice": 60, "alldata_id": 27859, "alldata_vehicle_id": 27859, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4004" } ] }, { "name": "Teikoku", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4751" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "6.9", "warrantytime": "4.9" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "With 4WD, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "2.1", "warrantytime": "1.5" }, "qualifiers": [] }, { "name": "With PS, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.4", "warrantytime": "0.2" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1986, "make": "Honda", "model": "Accord", "engine": "L4-1955cc 2.0L SOHC 2-bbl" }1986 Honda Accord L4-1955cc 2.0L SOHC FI - Piston Ring, Engine Costs
Parts: $0.00Labor: $90.00{ "partPrice": 0, "laborPrice": 90, "alldata_id": 27858, "alldata_vehicle_id": 27858, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "qualifiers": [ { "name": "Riken", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4004" } ] }, { "name": "Teikoku", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH4751" } ] } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "6.9", "warrantytime": "4.9" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "With 4WD, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "2.1", "warrantytime": "1.5" }, "qualifiers": [] }, { "name": "With PS, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.4", "warrantytime": "0.2" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1986, "make": "Honda", "model": "Accord", "engine": "L4-1955cc 2.0L SOHC FI" }1985 Honda Accord L4-1829cc 1.8L SOHC ES, ET 3-bbl - Piston Ring, Engine Costs
Parts: $9.00Labor: $50.00{ "partPrice": 9, "laborPrice": 50, "alldata_id": 27885, "alldata_vehicle_id": 27885, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH2003" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "6.9", "warrantytime": "4.9" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "With 4WD, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "2.1", "warrantytime": "1.5" }, "qualifiers": [] }, { "name": "With PS, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.4", "warrantytime": "0.2" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1985, "make": "Honda", "model": "Accord", "engine": "L4-1829cc 1.8L SOHC ES, ET 3-bbl" }1985 Honda Accord L4-1829cc 1.8L SOHC ES, ET FI - Piston Ring, Engine Costs
Parts: $68.00Labor: $92.00{ "partPrice": 68, "laborPrice": 92, "alldata_id": 27886, "alldata_vehicle_id": 27886, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH2003" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "6.9", "warrantytime": "4.9" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "With 4WD, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "2.1", "warrantytime": "1.5" }, "qualifiers": [] }, { "name": "With PS, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.4", "warrantytime": "0.2" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1985, "make": "Honda", "model": "Accord", "engine": "L4-1829cc 1.8L SOHC ES, ET FI" }1984 Honda Accord L4-1829cc 1800 ES,ET - Piston Ring, Engine Costs
Parts: $12.00Labor: $27.00{ "partPrice": 12, "laborPrice": 27, "alldata_id": 2956, "alldata_vehicle_id": 2956, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Ring Set (Standard)", "part": [ { "name": "31 - Ring Set (standard)", "note": "Includes: Rings For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011PH2003" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "6.9", "warrantytime": "4.9" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "With PS, Add", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan, Hone Cylinders & Plastigauge Bearings. ", "skill": "A", "standardtime": "0.4", "warrantytime": "0.2" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1984, "make": "Honda", "model": "Accord", "engine": "L4-1829cc 1800 ES,ET" }1983 Honda Accord L4-1751cc 1800 EK1 - Piston Ring, Engine Costs
Parts: $7.00Labor: $19.00{ "partPrice": 7, "laborPrice": 19, "alldata_id": 2952, "alldata_vehicle_id": 2952, "title": "Piston Ring, Engine", "parts": { "qualifiers": [ { "name": "Piston Rings (Standard)", "part": [ { "name": "31 - Piston Rings (standard)", "note": "Price Listed Is For One Piston.", "price": "0.00", "pricecode": "Contact Dealer for most current part and price information", "partnumber": "13011676604" } ] } ] }, "labors": { "operations": [ { "operation": "Replace", "qualifiers": [ { "name": "Piston Rings, Renew", "labor": { "note": "Includes: R&R Cylinder Head, Oil Pan & Plastigauge Bearings. ", "skill": "A", "standardtime": "7.9", "warrantytime": "0.0" }, "qualifiers": [ { "name": "Note", "qualifiers": [ { "name": "With AC, Add", "labor": { "skill": "A", "standardtime": "0.4", "warrantytime": "0.0" }, "qualifiers": [] }, { "name": "With PS, Add", "labor": { "skill": "A", "standardtime": "0.2", "warrantytime": "0.0" }, "qualifiers": [] } ] } ] } ] } ] }, "year": 1983, "make": "Honda", "model": "Accord", "engine": "L4-1751cc 1800 EK1" }